Online course booking - Tec Diving Curacao

The future of deep tec diving belongs to the CCR (closed circuit rebreather) and the Tec 40 CCR course is where it all starts. If you’re interested in technical diving and want to dive a rebreather, the Tec 40 CCR course is your entry into the tec diving realm. This first level of training introduces you to Type T CCRs, which can be electronic CCRs (eCCRs) and manual CCRs (mCCRs). During the course, you focus on developing the discipline it takes to be a technical diver while learning the details of proper setup, predive checks, dive planning, failure and problem management and teamwork for CCR diving.

Tec 60 CCR Diver is the second level of technical diving training with Type T CCRs. By completing the Tec 60 CCR course, you extend your CCR diving adventures down to a maximum depth of 60 metres/200 feet. You learn to complete multiple decompression stops, manage life-support problems and dive with trimix/heliox as a diluent. It’s a considerable challenge, but if you’re serious about being a tec CCR diver, then this course is your next step.

Tec 100 CCR Diver is the ultimate PADI Tec CCR rating. This training is significantly more challenging than the Tec 60 CCR Diver course because it includes the use of diluents and bailout gases that are hypoxic. You’ll learn to plan and make dives with hypoxic trimix/heliox using a Type T (technical) CCR to a maximum depth of 100 metres/330 feet while managing multiple bailout cylinders and completing multiple decompression stops. Very few extreme adventurers earn this rating. Will you be one of them?

If you're interested in technical diving, but haven’t yet met the prerequisites for the Tec 45/50 course.
You can start with the Tec 40 course. It’s the first sub vision of the Tec Deep diver course.
These are the first four dives. You use the PADI Tec Deep diver manual, which introduces you to:
1/Use Decompression software and dive computers to plan and make decompression dives with no more than 10 min deco time at max depth 40 meters/130 feet.
2/ Use a single cylinder of deco gas with max 50% oxygen to add conservatism to the required deco time. And it gifs you credit for the Tec 45/50 course.

The Tec45 course brings you closser to full tec diving. It,s the second part off Tec Deep diver(dive 5 till 8) We go further with you as a tec diver
The skills and equipment and planning need to dive to a max depht of 45 meter/145 feet.
The knowledge to plan and execute single and repetitive deco dives using a single stage cilinder of nitrox or oxygen to accelerate or add conservatism to the deco dive. Prepare for and respond to foreseeable technical diving emergencies.
And we make sure that you Master the skills and Procedures to go deeper in Tec diving. And you start to use the basic Tec Diving Equipment.

The Tec 50 course completes your training as a entry Tec diver. And takes you past the limits of recreational diving.
The fun is starting now. You learn more and more, and slowly brings you to the next level TRIMIX DIVER.
Well in the last four dives of Tec Deep Diver (9 up to 12), we learn you;
1/ Make actual deco dives as deep as 50 meters/165 feet.
2/ Use nitrox and/or oxygen for deco.
3/Use Desktop decompresion software tp create custom tables and plan your dives.
4/ And Qualify you to make technical deco dives by your self.
You use technical scuba diving equipment.

In this course we bring you deeper and longer under water. After you became a Tec 50 diver, and made some dives by yourself.
It’s now time to go Extreme. Now we help you to further explore the world of technical diving. Now you start using Trimix- a blend of oxygen, helium and nitrogen. So now we open de deep diving doors, to dive sites only a few divers if any ever see.We gone teach you to dive with Trimix and go to the outer edge of Tec diving. Even we don’t know the maximum depth for Tec diving.
This course has 8 dives, but depending on your certification level.
And again you will plan dives and make tables with decompression software. And training dives up to 90 meters/300feet.
The Scuba gear you gone use, is the same as Tec 50. But different exposure suit, maybe argon to inflate dry suit.

In this course we bring you deeper and longer under water. After you became a Tec 50 diver, and made some dives by yourself.
It’s now time to go Extreme. Now we help you to further explore the world of technical diving. Now you start using Trimix- a blend of oxygen, helium and nitrogen. So now we open de deep diving doors, to dive sites only a few divers if any ever see.We gone teach you to dive with Trimix and go to the outer edge of Tec diving. Even we don’t know the maximum depth for Tec diving.
This course has 6 dives, but depending on your certification level.
And again you will plan dives and make tables with decompression software. And training dives up to 65 meters/215feet.
The Scuba gear you gone use, is the same as Tec 50. But different exposure suit, maybe argon to inflate dry suit.

If you just don’t know if Tec CCR diving is something for you. We can do a try out dive. This dive is done with the Hollis Prism 2. We go over some skills, just like the first dive of the DSAT Tec CCR 40 course.

If you just don’t know if Tec diving is something for you. We can do a try out dive. This dive is done in Back mount configuration. (Side mount only if you are Side mount certified). We go over some skills, just like the first dive of the DSAT Tec 40 course.

Tec Side mount Diver Course

Tec Side mount offers the same benefits as the PADI Side mount Diver course, but gives you the opportunity to dive with 2+ cylinders for extended dive times or long and deep deco dives
The Tec Side mount Diver course is a great way to get started into technical diving because the skills you learn in this course will train you to handle multiple cylinders on a single dive. You can combine what you learn in the Tec Side mount Diver course with other open-circuit Tec courses that you take, or certifications you’ve already earned, to take advantage of side mount’s cylinder configuration and handling advantages. And we do the TEC 40/45/50 course in side mount configuration.
It’s a great way off diving

To start the course you must be:
1/ - Be certified as a PADI Advanced Open Water Diver or have a qualifying certification from another training organization
2/ - Have logged 30 or more dives
3/- At least 18 years old
4/ - Certification as a PADI Enriched Air Diver is recommended

Side mount Diver course
Find a new and different way to configure your cylinders with the PADI Side mount Diver course.
Side mounts diving offers:
1/an alternative way to streamline in the water
2/easier equipment transportation when topside
3/reduced lower back strain
4/provides redundant gas supply
5/ability to monitor all equipment because it’s in front of you increased gas supply for longer dives.
Because you are able to move the cylinder from your back to your side, it instantly takes the pressure off of your back and gives you more flexibility to move and enjoy your dive. Plus, you don’t have to walk to the dive site with the cylinders on your back. You can enter the water and clip them on and go.